Diffusion Vacuum Pump
With enriched industrial experience, we have been able to provide a wide spectrum of Diffusion Vacuum Pump. Our given vacuum pumps are tested on diverse parameters of quality so as to ensure its flawlessness. These vacuum pumps are developed by our professionals, utilizing optimum quality material as per the set guidelines. Offered vacuum pumps are available in diverse specifications as per the need of patrons.
| Max Flow Rate | 60 lps - 15000 lps |
| Brand | BVT |
| Model | BVT |
| Power(W) | 48 kW |
| Voltage | 110 V |
| Ultimate Pressure | 0.1-0.5 mbar |
Features:
- Consistent functioning
- Easy to operate
- Sturdy design
| Material of construction | SS 304L |
| High vacuum End Connection | DN 500 ISO – K |
| Upright for vacuum end connection | DN 100 ISO –K |
| Sealing | 02 nos of suitable Oring with center ring and outer ring will be provided for above connection. |
| Pumping speed | 12000 lit/ Sec at 10-4 mbar |
| Ultra total pressure | Less than 1x10-8 mbar |
| Maximum Admissible for Vacuum pressure | 5x10-1 mbar |
| Pump fluid | Diffusion pump oil |
| Heating | Heater will be connected to thermostat and thermal switch with temperature variable rotary knob (range 0 to 350oC) |
| Water cooled cold cap baffle | Water cooled cold baffle will be provided at the inlet of DP to prevent oil backstreaming apart from the Freon cooled baffle. |
| Oil level viewing glass | Will be provided with a maximum and minimum marking. |
| Leak tightness | Diffusion pump will be tested and certified for leak tightness better than 1x10-9 mbar lit/s of helium |
| Heater Type: | cartridge type Material of construction: Nichrome (80/20) |
| Accessories ( Integrated with D.P) | |
| Water flows monitors | Variable water flow monitors will be provided at the inlet of the cooling coil with suitable threading and with interlock to switch off if the flow is low. |
| Chevron Baffle at DP inlet | BVT makes chevron baffle. An astrotorous type optical opaque chevron. Baffle with closed circuit refrigerant cooling for clean oil free inlet of the system. The baffle will have ISO 500-K connection at inlet and closed circuit refrigeration unit with temp range of 0 to -20oC for cooling of chevron baffle will be provided (air cooled & capillary) |